IES Technical Sales offers products, services and expertise to help meet your needs in the areas of high vacuum, thin film/plasma, temperature, flow, and metrology.
IES Technical Sales provides technical applications and sales support services for a variety of high vacuum components and instruments, including connection hardware, chambers and weldments, gauges, seals, pump remanufacturing, new/used pumps, and gasline and pumpline heaters. Our suppliers include ADVACO, DuPont Kalrez, Nor-Cal Products, and Teledyne Hastings Instruments.
Nor-Cal Products offers a complete line of high vacuum products including flanges, fittings, adaptors, valves, pressure control systems, and UHV components.
If you are looking for vacuum chambers or custom weldments, Nor-Cal and IES Technical Sales can help.
Capacitance diaphragm gauges provide a very accurate means of measuring sub-atmospheric pressures at a reasonable cost.
From the original DV-4 and DV-6 thermocouple gauge tubes and analog gauges, to digital gauges, IES can offer vacuum measurement equipment with exceptional stability, accuracy and reliability under the most demanding conditions.
Through ADVACO, IES Technical Sales offers the best in vacuum pump and leak detector rebuilding services.
ADVACO is a service provider that gives you the infrastructure of an Original Product Manufacturer coupled with the flexibility of an independent service provider. The result is vacuum equipment service that restores your equipment to new performance at a fraction of replacement cost, along with the confidence that superior quality and technology are behind every rebuild.
We offer an extensive line-up of fluids that will provide maximum protection for your vacuum pumps and blowers, from standard hydrocarbon grades to synthetics. All hydrocarbon fluids are sold in a variety of sizes including quart, gallon, five gallon, and fifty-five gallon containers. Contact us with your specific requirements and we will suggest an appropriate fluid for your application.
The industry standard perfluoroelastomers (FFKM) for aggressive plasma, wet chemistry, and high temperature applications. Dupont Kalrez is the product to turn to when you need to decrease particles and increase your mean time to replacement. We offer standard o-rings, gaskets and sheets, custom seals, and bonded door seals. No matter what your application, contact us for help determing the best product for your application.
Nor-Cal traps range from sealed coaxial traps, which prevent oil backstreaming, to triple-pass water cooled traps, which remove condensable gases that contaminate mechanical pump oil or other parts of your system. All traps disassemble easily with an O-ring and V-clamp, with the exception of our sealed coaxial metal sieve traps which have a one piece body. The two piece body allows for easy removal for cleaning or replacement.
Nor-Cal Products has been the premier supplier of high quality vacuum isolation valves for nearly 50 years. Whatever the application demands, there is a valve to fit your requirement. Our valves provide outstanding performance in the most demanding applications ranging from semiconductor processing to UHV research.
IES Technical Sales provides technical applications and sales support services for Thin Film Processing, Plasma Processing and Surface Modification. Our suppliers include Advanced Energy, Gencoa, Nor-Cal Products and PVA TePla America. Contact us by phone or email.
From UHV research to production, Telemark is the industry leader in electron beam sources and power supplies for thin film evaporative coatings.
Removing photoresist masks after RIE or ion implant is a very important and frequently performed step in front-end semi- conductor manufacturing. Plasma photoresist ashing as a dry and eco-friendly process is replacing wet stripping / wet etching technologies.
Let IES Technical Sales help you decide your Plasma Ashing equipment using either Microwave or RF excitation, offering both Single Wafer and Batch Ashers. Microwave plasma is ideal for resist removal, generating a very high concentration of chemically active species along with low ion bombardment energy, guaranteeing fast ash rate and damage-free plasma processing. Microwave plasma systems are suitable for various substrates like Si, III/V-compounds, quartz, ceramic, lithium niobate, copper interconnect devices etc.
The SainTech XIAD Ion System has been specially developed to provide a cost effective solution for ion-based vacuum processes for medium to large sized deposition systems. The XIAD provides an extremely reliable and maintenance-free facility for many applications in PVD processes. The compact design and rugged construction allows easy installation to both new and existing vacuum deposition systems.
A critical component of the thin film deposition process, magnetron sputtering has become invaluable. Creating quality thin film coatings uses magnets to control the activity of high energy plasma. By this process, nanometer thin layers can be efficiently applied to substrates in a wide variety of applications.
Remote and inductive plasma source and power-delivery systems are available in a high-conductance, low-surface-area geometry. They are well suited to deliver reactive gas species to processes such as wafer pre-clean, photoresist strip, and atomic layer deposition (ALD). In addition, the high power density and high conductance makes it the ideal platform for post-process exhaust gas abatement.
IES is a provider of critical subsystems for thin film processing including DC, AC, and RF power management.
A Reactive Sputtering Control System for high speed adjustment of a reactive gas for magnetron sputter processes. An advanced direct digital control system which is adaptive to flow requirements and has many advantages over analog PID based solutions. It has a PC networked set-up and monitoring program, but the control algorithm is 'nested' in a stand-alone control box located near to the process chamber.
Downstream Closed Loop Pressure Control products allow users to realize unequalled vacuum process performance with the Nor-Cal Products Intellisys downstream pressure control system now in its third generation. Improved throughput and higher yields are made possible through a combination of the Intellisys system’s finer positional resolution, faster actuation speeds and maintenance free adaptive pressure control algorithm.
Through KOBOLD, IES can offer a wide range of flowmeters for both liquid and gas applications including variable area flowmeters, paddle wheel flowmeters, turbine flowmeters, vortex flowmeters, oval gear meters, target flowmeters, magnetic flowmeters and many more. KOBOLD also offers a wide range of flow switches and flow transmitters.
Mass Flow Meters and Controllers are available for high purity and Industrial needs. Find reliable solutions for applications in laboratory and industrial environments, high purity and low flows, corrosive gases and very high temperatures. Your needs can be met with these quality product lines, designed and manufactured by Teledyne Hastings.
With our relationship to Hitachi Aera Metals IES can offer Exhaust Pressure Controllers to meet your atmospheric pressure needs.
At IES Technical Sales we can custom make your purge panels to meet your positive-flow purging needs. Our systems maintain positive-flow purging and gas-blanketing with all necessary gas analysers. Please contact us for more information.
With ranges from high to low pressure valves and single stage or tied diaphragm regulators to choose from Veriflo offers only the highest quality products for your business. IES Technical Sales offers a wide variety of Veriflo products available to help your pressure needs.
IES Technical Sales provides technical applications and sales support services for a variety of temperature heating, sensing and controlling components and instruments. Our suppliers include Advanced Energy, Applied Thermal Control, Durex Industries, and Watlow.
Gasline and Pumpline Heaters and Controllers offered by Watlow can fill your temperature control needs. These Heaters and Controllers and made by one of the industries best in temperature control.
Watlow single- and multi-loop limits provide cost-effective solutions for single- and multi-channel, temperature monitoring. Limits monitor the process value where thermal system protection is needed, closing a contact output for normal operation and opening that contact to shut down the process or equipment when the value is outside the safe range.
Various configurations offer user-selectable or fixed-configuration sensor options including thermocouple, process, RTD and thermal switch inputs as well as user-settable or fixed limit values. Models with displays have user-selectable temperature units.
By engineering advanced temperature measurement systems, our Sekidenko optical fiber thermometers service provider and our thermal management solutions are among the world's best by adding value for our customers—whether you're an OEM who requires custom solutions or an end user who needs application expertise.
Watlow manufactures sensor products to fit customer application needs. A wide variety of temperature sensors including thermocouples, resistance temperature detectors (RTDs) and thermistors, as well as wire, mineral insulated cable, connectors and hardware are designed and supplied by Watlow and manufactured at their fully integrated faciliity.
PVA TePla offers the most advanced quality monitoring technologies for semiconductor production control: the TWIN for ion-implant dose monitoring. All of thier systems are fully 300mm compatible and comply with all requirements of class 1 clean room and factory automation.
If you need to measure step heights, roughness, stress, or waviness, whether on a flat surface or a non-flat surface, Bruker Nano Metrology is your best choice. IES is your Bruker Nano Metrology Dektak XT and Contour representative for New England and New York.
Thin Film Stress Measurement through PVA TePla offers the most advanced quality monitoring technologies for semiconductor production control: the SIRD for mechanical stress measurement. All of thier systems are fully 300mm compatible and comply with all requirements of class 1 clean room and factory automation
Let IES Technical Sales be your service provider for the High Technolgoy Fields. Come to us with your vacuum, temperature control, flow and pressure, metrology, and thin film/plasma needs and let us help you find a solution. IES is a proud distributor for the high technology industry.
As field representatives we operate in the northeastern U.S. states of Connecticut, Massachusetts, Maine, New Hampshire, New York, Rhode Island, and Vermont, plus the Canadian province of Quebec. In addition, we offer related products on a world-wide basis including custom thermal solutions and plasma process cables.
IES Technical Sales is committed to protecting your on-line privacy. Any information you supply will be used only to address the needs or interests you express. It will never be sold to any other person or organization, and we will only share it with the relevant companies, if any, in whose products or services you are interested.
© 2013 IES TECHNICAL SALES 250 North Street, #A-9, Danvers, MA 01923-1206SALES & SUPPORT: TEL 978.777.2900 FAX 978.777.2908About IES | Positions Open | Terms & Conditions | Industry Links | Request More Info | Contact Us